Contractor Portal
Your company on Obtempera: what needs attention, your supply chain, Projects, Countries and declarations.
Contractors in the top bar opens it. It covers your own company and the subcontractors beneath you, on the Projects where they work under you. Add Worker is at the top (see Add a Worker).
If you run more than one company, the portal opens on the first of them (an external company first, then A to Z), the same one O.B. speaks for. An administrator of the Customer's own direct workforce opens it for that workforce. A System Admin first chooses which Contractor to open it as: Choose the Contractor to open the portal as., with a search; the choice stays in the page address.
Words from the Customer
When every company you run works for one Customer, that Customer's own words may show under the page title: its welcome (Welcome from the Customer's name), exactly as it wrote it, and a Help card with Need help? and the person to ask, their email and phone. Each shows only when the Customer has filled it in. If your companies work for more than one Customer, or a System Admin opens the portal, these are not shown. The Customer sets them on the Branding card of Customer Settings; its policy links show to its Workers, on the Worker Portal.
When your company is Inactive
If the Customer has set your company Inactive, a notice at the top says so: no new Workers, invitations or Projects until a Customer Administrator or System Admin sets it Active again. Add Worker and Add Subcontractor are not shown, and pending subcontractor invitations cannot be resent. Your existing Workers and Projects carry on.
Audit actions
Where the Customer uses Auditing, Follow-up Actions lists what a Customer audit asked of this company only, each action naming the company it is for (if you run several companies, switch company to see the others'; a Customer's own-workforce portal lists only actions for its own workforce, never its Contractors'). Write what has been done or is planned and press Respond (later Update response); the Customer's auditor closes the action. Audit reports sent to you are listed above, each with Open PDF.
Workforce compliance and What needs attention
Workforce compliance shows the share of your live Worker assignments that are compliant, in the four colours: Compliant (green), Expiring soon (amber: compliant and cleared for site, but a required document, licence or course expires soon), Needs attention (red: not compliant, sent back or with training to do) and Not assessed (grey: not checked yet, in review included). See Worker statuses.
What needs attention lists:
- each declaration sent back to correct, or still to complete and submit, with its due date where the Customer has switched Country Compliance back on (the last day you can still add Workers there without it). Once that day has passed it says Workers cannot be added in the Country until the declaration is approved instead. It opens the declaration.
- each declaration you have submitted that the Customer is still checking, with a grey In review chip: it says whether Workers can be added there only once it is approved.
- Compliance attention required (red), Expiring soon (amber, a document expiring soon) and Not assessed yet (grey): each opens the Workers register showing those Workers.
With nothing to do it reads No compliance actions require attention.
Supply Chain
Subcontractor hierarchy shows the Project you choose: Direct Subcontractors, Total downstream, Tiers from yours down, and how many companies at each tier. Tiers are numbered as the Project page numbers them: your company shows its real tier on that Project (Tier 1 if the Customer engaged it directly, Tier 2 under another Contractor, and so on) and the companies below follow on from it. Tree view draws it; Data view lists each company with its Tier, Work Type, Main Contact, Workers and Direct Subcontractors, and Reset Password, which emails a password reset to a subcontractor's administrator; where the subcontractor has several, Which administrator gets the reset? asks you to choose one, then Send the reset. If a reset, resend or revoke is refused, the reason shows on the page. You see your subcontractors' people and their status; they never see yours, or anything above them.
Adding a subcontractor
Add Subcontractor invites a company onto the chosen Project, beneath you. The form names that Project at the top (Project: its name and code), and the button reads Send Invitation for its code; to invite onto another Project, close the form and choose it in the Supply Chain first. Give the Type of Work (Electrical, Mechanical, CSA, or Specialist with the Specialist Work described) and the main contact's first and last name, email and phone, then press Send Invitation. The subcontractor enters its own company details when it accepts, and completes its own Country Compliance Declaration for the Project's Country. Obtempera may add questions of its own around these: answer them with the rest (a required one must be answered; a document is checked for viruses before anyone can open it).
Until it accepts, the invitation is listed under Pending invitations with its answers. Resend sends a new link (the old one stops working) and keeps the answers. Revoke withdraws a pending invitation; one that has expired has nothing to revoke, so resend it instead, and a revoked one cannot be resent: add the subcontractor again. A link lasts 7 days.
A Project the Customer has completed leaves Active Projects and the Projects count. A Project the Customer has suspended or archived is frozen: it is marked Project frozen in the Project list, in Active Projects and in the Supply Chain, Add Subcontractor is greyed out with the reason, and its pending invitations show Project frozen with Resend greyed out, since nobody can join it until the Customer sets it Active again. In the Supply Chain, each company's Workers counts its Workers on the Project you chose, not on its other Projects.
Once it accepts, the answers given when it was invited, and any it gave when accepting, are under Answers given when invited, below the tree view and the data view.
The rest of the page
- The tiles: Workers (Worker records: every Worker of your company and the companies beneath you, whether or not they are placed on a Project now; the Projects' own cards count the people placed there), Projects, Countries, Compliant and Needs attention.
- Workforce actions: how many assignments are red and how many are still in onboarding or review, the count at each status, and View Workers.
- Declarations: Open goes to your Country Compliance Declarations. Each declaration you have submitted is listed with its state: In review (grey) while the Customer checks it, Approved (green) once approved.
- Active Projects: a card for each Project with its Workers, Compliant, Attention and Compliance percentage; the card opens the Workers register filtered to that Project. Each Project's own page, under Projects, also draws its Supply-chain map: your company and every company beneath it, with its tier, Workers and colour (see the Project page).
- Operating Countries: each Country's name and code. A declaration's state is on the Declarations card and on the declaration itself.
Contact for Workers
Set the Name or team, Email and Phone your Workers should use when they have a question, and press Save contact: each Worker sees it on their Overview. Until you set one, your Workers are shown your Contractor Administrators' names and work emails instead. Only your Contractor's own Administrator can change it.
Elsewhere in the top bar
The Scan site pass icon (a QR code) checks a Worker's site pass with your camera (see Scan site pass). The calendar icon, beside the mail and scan icons, opens the Calendar: the expiry and review dates of your Workers, your subcontractors' Workers and your company. Where the Customer has switched them on: Employment status, Risk & Reports and Speak Up in the menu, and Communications behind the mail icon.