Customer Settings

Your organisation's own settings: the setup checklist, your branding (logo, colour and words), record retention, the Privacy Notice, and the settings of the add-ons you have.

For: Customer Administrator · System AdminLast checked: 2026-11-13Open this page in Obtempera ↗

Open it with the cog (Settings) beside your name. A section that belongs to an add-on appears only while that add-on is on for your Customer. The longer sections (AI settings, right-to-work checks, Privacy Notice, licence requests) open and close, one at a time.

Setup checklist

At the top, <your Customer> setup checklist: what is still missing for your Customer, most pressing first. Each item names its area (Administrators, Countries & projects, Forms, Workflow, Workers, Contractors, Add-ons or Mail), is marked Blocks work, Likely missing or Worth knowing, and links to the page where you fix it. Where only Obtempera can set something up, it says Obtempera sets this up: ask your Obtempera contact. With nothing open it reads Everything checked is in place, with the number of checks passed.

O.B., the guide in the bottom corner, takes his setup tips from this checklist: he raises the items that block work or are likely missing, one at a time, each with Open the setup checklist, which opens the checklist of the Customer the tip is about when you look after more than one. For an item about reviewers he offers Show me how, a tour of appointing one on Users. He also says when Whistleblowing is on with no Disclosure Administrator (Obtempera appoints the first: ask your Obtempera contact), and when UK right-to-work checks are on but your Vouchsafe client ID and secret are not saved yet, with Open the settings, until they are.

Countries

<your Customer> Countries lists every Country Obtempera has set up for you, each with its Contractor Country Compliance switch: whether your Contractors in that Country declare their company documents before their Workers can be added. It changes at once; switching it off asks first, applies to all your Contractors in that Country, and keeps their compliance history. It works for a Country with no Project yet too. An inactive Country's switch cannot be used. Only Obtempera adds Countries: ask your Obtempera contact for another one.

Branding

Your logo, one accent colour, and your own words for your Workers and Contractors. Obtempera's System Admin has the same card on your Customer's record. While your Customer is archived the card shows what was saved and nothing can be changed.

Logo. PNG or JPG, up to 2 MB. It appears beside Obtempera's identity, never instead of it. The card lists every place it shows: the app header (for your own staff, and for Contractors and Workers who work only for you; a Contractor working for several Customers sees Obtempera's mark alone), the Worker Portal, training certificates, PDFs and exports (the Matrix PDF, audit reports and risk outputs: yours top-left, Obtempera's top-right), emails and the site pass. Upload logo (or Replace logo) puts it in place; Remove logo goes back to Obtempera's mark alone. A new logo is checked for viruses first and shows once the check has passed, usually within a few minutes. Certificates and PDFs already downloaded do not change.

Accent colour. One colour for the header bar, the main buttons and links your people see. Pick it with the colour picker or type its hex code (such as #1d6fa5); the preview shows a header bar, a button and a link in it as you choose. White text must stay readable on it, at a contrast of at least 4.5 to 1: a colour that falls short is refused before you save, with the contrast it reached and a darker shade of the same colour to try. A shade for dark mode is worked out for you. The status colours (Green, Amber, Red and Grey) never change. Use Obtempera's colour (or a blank box) goes back to Obtempera's own.

In the app, the whole header bar takes your colour with white words on it, and Obtempera's mark and your logo sit together on a small white plate at its left, so both look exactly as drawn. The menus that open from the bar stay white. On a phone your logo stays beside Obtempera's mark, next to the Menu button. If your logo and a long list of modules do not fit on one line, the modules fold into Menu, as they already do on narrower screens. Obtempera's System Admin, and anyone who works for more than one Customer, keep Obtempera's own colours.

Welcome message. Up to 500 characters (the counter shows how many are left), shown at the top of the Worker Portal and of your Contractors' first page. Workers and Contractors see it exactly as you write it, in your language: it is not translated. It is plain text: web addresses show as text, not links, and tags such as <b> are refused.

Help contact. A name or team, an email and a phone number, shown where your Workers and Contractors look for help. Fill in any of them; leave all three blank to show none.

Policy links. Up to five links shown in the Worker Portal, such as your site safety or conduct policy: a name (up to 80 characters) and a web address starting https:// for each. Add a link adds a row and Remove takes one away.

Save branding saves the colour, the welcome message, the help contact and the policy links together; Discard undoes unsaved changes, and leaving the page with changes unsaved asks first. Your people see the change the next time a page opens. Every change is recorded in the audit trail, with what it was before.

Emails sent for you carry your logo too: at the top of each email, on the left, with Obtempera's mark on the right. The logo travels inside the email itself, so nothing is fetched from the internet when it is opened. Every email still has its plain-text version, word for word as before, for mail apps that do not show pictures. A logo still being checked for viruses is left out until the check has passed. Emails already sent do not change.

Record retention

How long your Workers' compliance records are kept once a Worker has finished with you: 1 to 7 years, 6 unless you choose otherwise. The period counts from the end of the Worker's last assignment with you (an assignment ends when it is made Inactive, its Project is Completed or Archived, or the Worker is Archived or Left contractor), or from the day your Customer is archived. Then the Worker's compliance evidence and documents (earlier versions too), the answers on their compliance records, their My Details and their Privacy Notice signatures are deleted automatically, and the Worker record's name and email are replaced by a one-way fingerprint that nobody can read back; each deletion is recorded in the audit trail. If the same person is added again later with the same email, their earlier (deleted) history is linked to the new record.

The choice applies as soon as you make it. Choosing a shorter period asks you first: records already past it are deleted when the retention job next runs (within about 15 minutes) and cannot be recovered. Obtempera can set the period too.

Send Workers the retention notice says when a Worker is told what you still hold about them: 12 months after their last placement with you ends unless you choose otherwise (1 to 60 months), then once a year until the records are deleted. The email lists what is held by category (documents, answers, licences, training records; never the contents), why it is kept, and until when, with a Request removal link that opens the removal request in their Worker Portal. It is a notice, not a request for consent: nothing changes if they do not answer. It is never sent to a Worker whose records have been erased, who is suspended, or who already has a removal request or a "Leaving Obtempera" request open with you. The panel shows how many were sent in the last 12 months. Open removal requests are listed on GDPR requests.

Employment status assessment forms

While Obtempera Employment Status is on, <your Customer> assessment forms chooses the form a self-employed Worker answers for their employment status assessment, for Ireland and for the United Kingdom: the Obtempera default, or a status-assessment form built under Fields & Forms. Under each it says which form, and which version, is in use now. Save assessment forms applies the choice to assessments sent from then on; one already sent keeps its form. Discard undoes unsaved changes. Obtempera's System Admin has the same card on your Customer's record.

Privacy Notice

Use Obtempera's wording or publish your own. Workers sign the current version before anything else in the Worker Portal, and are asked to sign again when you publish new wording of your own, or when Obtempera publishes its default as a material change.

AI settings

While AI assistance is on, <your Customer> AI settings holds your AI provider, an optional model and your API key (stored encrypted; only its last four characters are ever shown), with Test the key, Replace and Remove. Below it: the features the key powers, each switched on or off; Let agents check official websites; Who can ask the country agents (Customer Administrators by default; tick other roles or add named people — only people whose role may ask are offered, so Disclosure Handlers, Disclosure Administrators and Report Viewers are not); and the Country agents switched on for you, which Obtempera chooses. See Ask.

UK right-to-work checks

While the UK right-to-work checks add-on is on, <your Customer> right-to-work checks (Vouchsafe) connects your own Vouchsafe account, on which your HR reviewers check a UK Worker's right to work from the share code on their form. The check runs on your own Vouchsafe account and bill. Its heading says Connected (or Connected · sandbox) or Not connected yet; inside, a failed last test shows Connection failed.

  • Enter the Vouchsafe client ID and Vouchsafe client secret from the Vouchsafe dashboard (API integration), and press Save Vouchsafe details; Discard undoes unsaved changes. The secret is stored encrypted and never shown again: leave it blank to keep the one stored. A sandbox secret starts sandbox- and gives Vouchsafe's test answers only, marked Sandbox (test data).
  • Test connection, once saved, signs in to Vouchsafe only: nothing is checked or charged. The panel says when the last test succeeded or failed.

Licence requests

While Licensing is on, <your Customer> licence requests is where you ask for a licence or certification your sites accept that is not on the list: Request a licence, give its name (and, if you know them, the scheme code, who issues it and anything that helps Obtempera find it), then Send request. Obtempera's System Admin decides each request on Licence Requests: it can add the licence for you straight away, then decides whether every Customer gets it. Your requests are listed one under another, each with its name, then its status on the line below: In review, Added or Declined.

Review order

While Licensing is on, Review order sets where licences are checked. HR always reviews first; then choose HR, then EHS, then Licensing or HR, then Licensing, then EHS, and Save review order. It is set once: as soon as a Worker's review route includes Licensing, it can no longer be changed, and the section says so. Workers already in review keep the order they started with. The lock stays even if Licensing is later switched off, on a Project or for the Customer, and back on again.

Also configured by you

Links to Training certificates (wording, signatory and preview, on the Training page's Certificate view; while Training is on), GDPR requests (Workers' open requests to remove their data or for a copy of it, with the one-month deadline; see GDPR requests) and Users and access (your administrators and reviewers).

Not here

Switching an add-on on or off is Obtempera's: a System Admin does it in the Settings section of your Customer's record. A System Admin who opens Customer Settings is pointed to Customers, where each Customer's settings are on its own page.