Site pass check
What the site gate sees when it scans a Worker's site pass: each Project, a colour and a status, green or amber only when cleared for site.
Scanning a Worker's site pass opens this page. Any phone camera will do, and nobody needs to be signed in: the link in the code is the permission. The ? beside Obtempera site pass at the top opens this article. The page says Checking…, then shows the Worker's name and Checked with the time, then Check their photo ID matches this name.
One card per Project
Each Project the Worker is placed on, unless their time on it has ended, has a card: the Project's name and code, a coloured status with the reason, and the company they work for with the Customer it works for. A Worker who works for more than one company shows the Projects of every one.
| Colour | Status | Meaning |
|---|---|---|
| Green | Cleared for site | They may go on site: Compliant on that Project, the Project ready for them and not suspended, completed or archived, and their Worker record active. |
| Amber | Cleared for site | They may go on site, as for Green, but a required document, licence or course expires soon. Green and Amber are never shown for anyone who is not cleared. |
| Grey | Not reviewed yet or In review | They have not submitted their compliance yet, or a reviewer is still checking it. Not for site yet. If a required document, licence or course has already expired, the card shows red instead. |
| Red | Sent back, Training outstanding, Paused, Not compliant or Not cleared | Not for site. The reason is written on the card, for example: Paused on this Project., The Project is suspended. (or completed, or archived), Required training is outstanding., A required document, licence or course needs renewing., Something on their record has expired or was refused. (on an older record), Their compliance record is not complete., Required training or a document is outstanding. (shown when they are Compliant but the Project is not ready for them yet), The Worker record is suspended., No longer with the company. |
A Worker on no Project shows Not on any Project.
When the page cannot check
Under Not valid:
- This pass has expired. Ask them to open their site pass again: it renews itself. Each code works for 10 minutes; the Worker's phone renews it every 4 while the pass is open, so a screenshot or a photo of the code soon expires.
- This is not an Obtempera site pass. The link is not one Obtempera made.
- This pass no longer belongs to an active Worker.
Signed in to Obtempera
Someone signed in who may scan passes (System Admin, Customer and Contractor Administrators, HR and EHS) also sees Open their Worker record, for each record that is theirs to open. Anyone else signed in, such as a Licence Reviewer or a Report Viewer, sees the same result as the gate and nothing more. The same result, with the camera inside Obtempera, is on Scan site pass.
What is recorded
Every check is recorded against the Worker, with what was shown. The page shows nothing else about the Worker: no documents, no answers, no contact details. It takes only a limited number of checks a minute from any one connection.