The public reporting page
Reporting from a Customer's public reporting link, without an account.
Every Customer with a whistleblowing channel has a public reporting address, which it prints on its site notices and gives to its Contractors. Anyone with the link can report — an employee, a subcontractor's worker, a supplier — with no Obtempera account. The ? beside the page heading opens this article; the help needs no sign-in.
Making a report
- Open the link. Under Raise a whistleblowing concern you will see whose channel it is and whether it accepts anonymous reports. The report is read by the designated handler only; Obtempera, which runs the channel, cannot read it. A personal grievance about your own pay, hours or treatment is not for this channel: the page points you to your employer's grievance procedure.
- Your name is optional where anonymous reports are accepted, and required where they are not (the page then says This channel needs your name. It is kept confidential.). A way to reach you (an email or a phone number) is always optional: replies are posted to your case either way. Both are kept confidential and seen only by the handler.
- Choose the Country and, if it is about one site, the Project.
- Answer the questions. Where a question asks for a document, attach it there. Beside the button, the page counts how many you have answered.
- Complete the check that you are a person, below the form, then press Send my report. If it cannot be sent, the page says why (Some answers need attention. marks the questions to fix), and the person check must be done again.
Your report has been received says within how many days it will be acknowledged, and that you will be told what has been done or is planned within three months of that acknowledgement. You get a Reference and Your code; write both down — the code is shown only this once and cannot be recovered. If you gave an email address, you are emailed when the handler replies or there is an update, with a link to your case.
Adding evidence
On the confirmation screen, Add your evidence now takes photos or documents (PDF, JPG or PNG) straight away. You can add more later by following your case with your code.
Following a report
On the reporting page, under Already reported and want to follow it?, choose Enter your reference and code.; or press Follow your case on the confirmation screen. You can read the handler's replies, answer questions and add files: see Follow your case.
If you would rather talk
If the Customer has given a phone number or a way to ask for a meeting, it is shown at the top of the page under Prefer to talk? (and again beside the person check, should that check not load). A spoken report is written up by the handler and gets the same reference and code.
When the link is not open
If the channel is switched off, or the link has been replaced, the page says This reporting link is not open, with a link to follow a case you already made. If the organisation's channel is closed, the page says This reporting channel is closed and says it cannot take new reports but a report already made can still be followed up with its reference and code; its only button is Follow your case: it takes no new reports. Either way, a case already open can still be followed with its reference and code.